Sewing Cosplay Costumes
Posted in Costumes on 08/30/2009 06:16 am by admin
To start with, let's take a look at the materials.then the following procedure:
1. Use your equipment or a sharp knife to slot-a Pop on the surface of the flap can end is near.
2.cut the upper and lower surface with your scissors.
3.cut vertical opening on the floor can, it will unfold a piece of metal.
4. turn inside out, and drag a rectangle with the width of 55 mm in length and 12.5 cm Mark with pen.
5.then you draw a curve like this on every corner.
6.cut from the drawing.
7th place the can on a prepared paper board, carpet, and provides a similar form on the board.
8.cut also from the drawing.
9. fully double-sided adhesive tape cover on a piece of paper.
10. They hold the paper cut with a metal.
11. Then, 3-point mark on the left and right edges of the can into slices.
12. Speer the 6 points with 6 lies, then the center of the forehead Guard is is done
13. Drag the icon of the Ninja village, you like to make. (PS: Do not copy the instructions You can turn any symbol, the people you like).
14. removes the icon.
15. You stick the symbol on the forehead guard with double-sided adhesive tape.
16. Color the edge of the paper board with silver paint and brush.
17. Scissors cloth in the cyan rectangle with width 17 cm and 78 cm in length, then fold the cloth in width.
18.cut of a triangular shape on both ends of the cloth.
19. Cover the negative side of the forehead guard with double-sided adhesive tape
20. unfold the cloth to keep the guard in the middle of the forehead, it
21. Blanket one side of a paper board with double-sided adhesive tape
22. glue the paper Board in step 21 on the harmful effects of the substance, if you've done that, the cloth should be nipped in two paper.
23. Cover the other side of the paper board met only with double-sided adhesive
24. fold the top and bottom of cloth in the direction of the adhesive facade
25. Reverse triangular part of one end
26. Sew the corresponding margin of the triangle with needle and tread
27. Sew the fold line in all the edges in the back, The adhesive used to stick the cloth on the material
28. then you have done to protect the beautiful Naruto's forehead.
About the Author:
alice hana from cosplay classes which provide the useful resources about cosplay costumes and Accessories for cosplayers
Article Source: ArticlesBase.com - An Easiest Way to Make a Naruto Forehead Guard
|
|
SIMPLICITY 2525 Gothic Steampunk Cosplay Costumes + Hats Sewing Pattern $8.99 |
|
|
SIMPLICITY 2757 Goth Steampunk Vampire Cosplay Costume Sewing Pattern $9.99 |
|
|
SIMPLICITY 2757 Goth Steampunk Vampire Cosplay Costume Sewing Pattern $9.99 |
|
|
SIMPLICITY 2163 Gothic Vampire Cosplay Costume Sewing Pattern $9.99 |
|
|
SIMPLICITY 2163 Gothic Vampire Cosplay Costume Sewing Pattern $9.99 |
|
|
SIMPLICITY 2777 Gothic Vampire Cosplay Costume Sewing Pattern $9.99 |
|
|
SIMPLICITY 2777 Gothic Vampire Cosplay Costume Sewing Pattern $9.99 |
How to make hair wefts on your sewing machine
